1)HALF ADDER

Simulator 1:

Step-1) Connect the supply(+5V)      to the circuit.
Step-2) First press "ADD" button to add basic state of your output in the given table.
Step-3) Press the switches to select the required inputs "A" and "B".
Step-4) Press "ADD" button to add your inputs and outputs in the given table.
Step-5) Repeat steps 3 & 4 for next state of inputs and their corresponding outputs.
Step-6) Press the "PRINT" button after completing your simulation to get your results.
Step-7) Press the "RESET" button whenever you want to refresh your simulator.

Simulator 2:

Step-1) Enter the Boolean input "A" and "B".
Step-2) Enter the Boolean output for your corresponding inputs.
Step-3) Click on "Circuit" button to check the circuit diagram for half adder.
Step-4) Click on "Check" Button to verify your output.
Step-5) Click "Print" if you want to get print out of Truth Table.
Step-6) Click on "Reset" button if you want to reset input and outputs.

2)FULL ADDER

Simulator 1:

Step-1) Connect the supply(+5V)      to the circuit.
Step-2) First press "ADD" button to add basic state of your output in the given table.
Step-3) Press the switches to select the required inputs "A" and "B" and "C_in".
Step-4) Press "ADD" button to add your inputs and outputs in the given table.
Step-5) Repeat steps 3 & 4 for next state of inputs and their corresponding outputs.
Step-6) Press the "PRINT" button after completing your simulation to get your results.
Step-7) Press the "RESET" button whenever you want to refresh your simulator.

Simulator 2:

Step-1) Enter the Boolean input "A" and "B" and "Cin".
Step-2) Enter the Boolean output for your corresponding inputs.
Step-3) Click on "Circuit" button to check the circuit diagram for full adder.
Step-4) Click on "Check" Button to verify your output.
Step-5) Click "Print" if you want to get print out of Truth Table.
Step-6) Click on "Reset" button if you want to reset input and outputs.